Powerwalker Battery pack for VFI 10000P_RT LCD Manual de usuario descargar pdf (Pagina 18)

3.5 Rack mount Setup

CAUTION:

The cabinet is heavy, so:

1) Remove the battery tray from the UPS before lifting.

2) Lifting the cabinets into the rack requires a minimum of two

people.

CAUTION: Removing the batteries requiered precautions, which

should be performed or supervised by personnel with knowledge of

batteries . Keep unauthorized personnel away from batteries.

CAUTION: If installing an EBM(Extended Battery Module), install

the EBM directly below the UPS.

3.5.1 Install the UPS and EBM (Extended Battery Modules) in

a rack:

1. Open the front panel and put it above the UPS.

Figure 3-8. Open the front panel (left: 6K Model, right: 10K Model)

2. Remove the battery protection plate:

Figure 3-9. Removing the Battery Protection Plate

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Sin comentarios

Powerwalker Battery pack for VFI 10000P_RT LCD Manual de usuario Pagina 18