Powerwalker SNMP DP-522 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
2.3.3 Data Log
This page is a UPS data log. It records UPS Input Voltage/Output Voltage/
Frequency/ Loading/Capacity/ Temperature. When reach to the limit, it rewrites on
the previous logs. Logs can be saved in CSV format by clicking on “Save Data
Log”.
Date/Time
This is a record of the Date (yyyy/mm/dd) and Time (hh:mm:ss) that the data was
recorded. The interval between every log can be set in /Configuration/ UPS configuration/
UPS recorded/UPS data Log/.
Input Volt.
This section shows records of the UPS Input voltage readings. (Unit: Volt.)
Output Volt.
This section shows records of the UPS Output voltage readings. (Unit: Volt.)
Freq. (Hz)
This section shows records of the UPS Input Frequency. (Unit: Hertz)
Load
This section shows records of the UPS Output loading. (shown as %)
Capacity
This section shows records of the UPS battery capacity. (shown as %)
Temp.
This section shows records of the UPS internal temperature. (unit: degrees Centigrade)
Env. Temp.
This section shows environmental temperature which detected by NetFeeler II
Env. Humidity
This section shows environmental humidity which detected by NetFeeler II
48
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 98 99

Comentarios a estos manuales

Sin comentarios