Powerwalker WinPower Software V.4.3.0.1 Manual Manual de usuario descargar pdf (Pagina 19)

Diagram 3-1-2

Illustration of UPS Status information bar:

The UPS status figure contains five parts: AC LINE, UPS, BATTERY LOAD and BYPASS.

2. Menu and Dialog

1) Auto Search Device

When user select "Auto Search Device" item from "System" Menu, PowerWalker-WinPower will

start searching for the device connect to the computer’s serial port or USB port (for telecom power,

the USB driver must be installed; For ATS, A crossover RS232 cable will be needed that crosses

pins 2 and 3, so that pin 2 on one side is connected to pin 3 on the other.). See the following

diagram 3-2-1-1 and diagram 3-2-1-2. PowerWalker-WinPower can monitor not more than four COM

ports and one USB port in one computer. Only on Windows 98/2000/2003/XP/Vista, Mac OS X and

Linux (with kernel 2.6) can use the USB port. For UPS, no USB driver is needed. But telecom

power's USB communication only works with Windows 2000/XP/Vista and need install the USB

driver at directory USB driver.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 108 109

Sin comentarios

Powerwalker WinPower Software V.4.3.0.1 Manual Manual de usuario Pagina 19