Powerwalker WinPower Software V.4.3.0.1 Manual Manual de usuario descargar pdf (Pagina 77)

11. How to realize monitoring device remotely in LAN within the same network

 Precondition

To realize monitoring device remotely in LAN within the same network, the communication

protocol of the computers with PowerWalker-WinPower must include TCP/IP protocol.

 Steps for realization

 Keep network communication smooth: test with network command “PING” under command

prompt window. For example, a computer named xc in LAN, whose corresponding IP address is

192.168.1.221, and then you can finish the test with command “ping 192.168.1.221”. Refer to the

following Diagram 4-11-1, which indicates that the physical link of LAN is smooth.

Diagram 4-11-1

 Remote Control Permission Switch: This is a selectable menu item. User can click the

submenu “Accept Remote Device” of the “Monitor” menu. Refer to the following diagram 4-11-2.

Diagram 4-11-2

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 108 109

Sin comentarios

Powerwalker WinPower Software V.4.3.0.1 Manual Manual de usuario Pagina 77